Free Shipping on Part/Accessories Order Over $150

phone: 208-450-3044
  • Geissele Airborne Charging Handle Geissele Airborne Charging Handle

    Geissele

    Geissele Airborne Charging Handle

    The Airborne Charging Handle (ACH) was developed at the request of an elite organization famous for its expertise in aerial insertion. The organization requested a lower profile lever design to reduce the chances of snagging. The ACH's lower profile...

    $105.00 - $115.00
  • Geissele Super Charging Handle Geissele Super Charging Handle

    Geissele

    Geissele Super Charging Handle

    The Super Charging Handle (SCH) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. The levers are dual contoured similar to that of the charging...

    $105.00 - $115.00
  • BCMGUNFIGHTER Ambidextrous Charging Handle - Mod 4X4

    Bravo Company Mfg

    BCMGUNFIGHTER Ambidextrous Charging Handle - Mod 4X4

    The BCMGUNFIGHTER Charging Handle features internal redesigns to direct force off of the weakest part of the system, the roll pin, and into the body of the charging handle during support hand only manipulations. This new design has a built in backstop...

    $79.95
  • BCM A2X Flash Hider, 556NATO,1/2x28 BCM A2X Flash Hider, 556NATO,1/2x28

    Bravo Company Mfg

    BCM A2X Flash Hider, 556NATO,1/2x28

    The A2X is an extended version of the A2 flash hider found on the M16 and M4 series of rifles. It is machined from 4150 steel with a phosphate coat and predrilled hole at the base for permanent installation.

    $38.95
  • BCMGUNFIGHTER Compensator MOD 0 - 5.56

    Bravo Company Mfg

    BCMGUNFIGHTER Compensator MOD 0 - 5.56

    Bravo's BCmGunfighter Compensator Mod 0 is designed to have much less side blast and noise associated with typical compensator, this makes it ideal for working in teams for CQB. The exterior dimensions are consistent with Mil-specs for mounting flash...

    $99.99
  • BCM PNT Trigger Assembly AR15

    Bravo Company Mfg

    BCM PNT Trigger Assembly AR15

    BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.

    $69.99
  • Radian Raptor LT Charging Handle AR10/SR25

    Radian Weapons

    Radian Raptor LT Charging Handle AR10/SR25

    The Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the ultimate combination of strength, weight, and durability.

    $84.95 - $89.95
  • Geissele Super Charging Handle 7.62 Geissele Super Charging Handle 7.62

    Geissele

    Geissele Super Charging Handle 7.62

    The Super Charging Handle (SCH) is machined from a solid block of aircraft grade 7075-T6 aluminum with a hardcoat anodized finish. Its ambidextrous design allows for seamless operation from either side of the weapon.

    $140.00 - $150.00
  • Radian Raptor Charging Handle AR10/SR25 Radian Raptor Charging Handle AR10/SR25

    Radian Weapons

    Radian Raptor Charging Handle AR10/SR25

    The Raptor is truly revolutionary in design & function. From rapid palm blading or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Made in the USA from aircraft grade 7075 aluminum and MILSPEC...

    $94.95 - $109.95
  • Radian Raptor SD Charging Handle Radian Raptor SD Charging Handle Radian Raptor SD Charging Handle

    Radian Weapons

    Radian Raptor SD Charging Handle

    The silencer-optimized Raptor-SD features a ported shaft designed to redirect gasses down and forward, away from the shooters face when shooting suppressed. Its ambidextrous design allows rapid palm "blading" or finger-thumb charging of the weapon,...

    $119.95 - $124.95
  • Radian Talon Safety Selector 4 Lever Radian Talon Safety Selector 4 Lever Radian Talon Safety Selector 4 Lever

    Radian Weapons

    Radian Talon Safety Selector 4 Lever

    The Talon ambidextrous safety selector is a modular design that can be installed as a standard 90 degree or as a 45 degree short throw by simply rotating the shaft 180 degree inside the lower receiver. Selector levers install using a precision machined...

    $77.45 - $87.45
  • Radian Raptor Charging Handle Radian Raptor Charging Handle Radian Raptor Charging Handle Radian Raptor Charging Handle Radian Raptor Charging Handle

    Radian Weapons

    Radian Raptor Charging Handle

    The Raptor is truly revolutionary in design & function. From rapid palm blading or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Made in the USA from aircraft grade 7075 aluminum and milspec...

    $89.95 - $99.95
  • Reptilia CQB Pistol Grip Reptilia CQB Pistol Grip Reptilia CQB Pistol Grip Reptilia CQB Pistol Grip

    Reptilia

    Reptilia CQB Pistol Grip

    The CQG grip has been specifically designed to enhance ergonomics and performance of compact sized short-barreled rifles, AR15 pistols, pistol caliber carbines, and PDWs. The CQG supports a wide range of hand sizes and weapon configurations, featuring a...

    $19.99
  • Strike Industries Mag Release for CZ EVO Strike Industries Mag Release for CZ EVO

    Strike Industries

    Strike Industries Mag Release for CZ EVO

    The Strike Industries Magazine Release for the CZ Scorpion EVO is a lightweight, high-strength polymer solution that enables the user to depress the magazine release utilizing only one hand. Whereas the original design requires two hands to disengage a...

    $19.95
  • Strike Industries Medium Charging Handle CZ EVO Strike Industries Medium Charging Handle CZ EVO

    Strike Industries

    Strike Industries Medium Charging Handle CZ EVO

    The Strike Industries Charging Handle for CZ Scorpion EVO (Medium) provides a longer, ergonomic and positive tactile feeling over the original CZ factory charging handle. No more fear of tearing up your knuckles with your fingers being too close to the...

    $17.95
  • Magpul MOE K2 AK Grip Magpul MOE K2 AK Grip

    Magpul

    Magpul MOE K2 AK Grip

    Similar to the MOE SL, the MOE-K2 AK Grip is a drop-in upgrade for AK47/AK74 platforms that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle improves comfort and control on these shorter LOP rifles that...

    $20.95
  • Magpul MOE AK Grip Magpul MOE AK Grip

    Magpul

    Magpul MOE AK Grip

    A drop-in upgrade for AK-pattern pistol grips, the MOE AK Grip is designed to improve ergonomics and comes with an aggressive TSP texture for positive weapon control. With a one-piece reinforced polymer construction and compatibility with Magpul Grip...

    $20.95
  • Radian Raptor LT Charging Handle Radian Raptor LT Charging Handle Radian Raptor LT Charging Handle

    Radian Weapons

    Radian Raptor LT Charging Handle

    The Radian Raptor-LT uses the same patented ambidextrous functionality as its predecessor. The Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the...

    $69.95 - $74.95
  • Magpul M-Lok Aluminum Rail Section Magpul M-Lok Aluminum Rail Section Magpul M-Lok Aluminum Rail Section Magpul M-Lok Aluminum Rail Section Magpul M-Lok Aluminum Rail Section

    Magpul

    Magpul M-Lok Aluminum Rail Section

    Made in the USA and designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Machined from...

    $17.95